Table of Contents
Advertisement
Appliance settings
en
2
Appliance settings
Y ou can activate/deactivate or change
A p p l i a n c e s e t t i n g s
the appliance settings directly.
Childproof lock
You can activate or deactivate the
appliance's childproof lock. You can
activate the childproof lock to prevent
the control panel from accidentally
being operated.
Activate/deactivate the appliance
setting as follows:
Press and hold 5(Drying Time) and ñ
(Finished in) at the same time for
approx. three seconds.
E is shown/hidden in the display.
The childproof lock is activated/
deactivated.
Notes
You can activate the childproof lock
■
at any time after you switch on the
appliance.
The childproof lock remains active
■
even after the appliance has been
switched off. In order to operate the
control panel when you turn on the
appliance, you need to deactivate
the childproof lock.
Notification signal
You can activate or deactivate the
notification signal at the end of the
programme. If you activate this setting,
an audible signal will sound once the
programme has ended.
Activate/deactivate the appliance
setting as follows:
Press C (Signal).
C is shown/hidden in the display.
30
The notification signal at the end of
programme is activated/deactivated.
If a signal does not sound when
Note:
the programme ends even though the
notification signal is activated, you can
change the appliance setting.
~ Page 31
Altering the appliance settings
You can call up and change the
following appliance settings:
Volume of the audible notification
■
signals (e.g. at the end of a
programme)
Volume of the audible operating
■
signals
Spin speed used for spinning the
■
laundry before drying
Call up and change the appliance
settings as follows:
Set the programme to position 1.
1.
Press and hold A (Start/Reload).
2.
At the same time:
Set the programme to position 2.
3.
Release A (Start/Reload).
4.
Advertisement
Table of Contents
