Notification Signal; Altering The Appliance Settings - Bosch WTR85TH0 Installation And Operating Instructions Manual

Notification signal

You can activate or deactivate the
notification signal at the end of the
programme. If you activate this setting,
an audible signal will sound once the
programme has ended.
Activate/deactivate the appliance
setting as follows:
Press Signal .
C is shown/hidden in the display.
The notification signal at the end of
programme is activated/deactivated.
If a signal does not sound when
Note:
the programme ends even though the
notification signal is activated, you can
change the appliance setting.
~ Page 34

Altering the appliance settings

You can call up and change the
following appliance settings:
Volume of the audible notification
■
signals (e.g. at the end of a
programme)
Volume of the audible operating
■
signals
Spin speed used for spinning the
■
laundry before drying
Appliance settings
Call up and change the appliance
settings as follows:
Set the programme to position 1.
1.
Press and hold Start/Nachlegen/
2.
Pause (Start/Reload/Pause) . At the
same time:
Set the programme to position 2.
3.
Release Start/Nachlegen/Pause
4.
(Start/Reload/Pause) .
You can now alter the appliance
settings.
en
33