Cleaning and maintenance
en
Set the programme to position 2.
1.
The current setting will appear on the
display.
Press 5 (Drying Time) or ñ(Ready
2.
in) until the required setting appears
on the display.
Settings:
600 0
Low
¹
1800 0
High
Alter any additional appliance
3.
settings you require or save and exit
the appliance settings.
Saving and exiting the appliance
settings
Save and exit the appliance settings as
follows:
Turn the programme selector to
1.
switch off the appliance.
Wait 5 seconds.
2.
The selected settings are
Note:
retained even after the appliance has
been switched off.
32
D
Cleaning and
maintenance
C leaning the appliance
C l e a n i n g a n d m a i n t e n a n c e
:
Warning
Risk of death!
The appliance is powered by electricity.
There is a risk of electric shock if you
come into contact with live components.
Therefore please note:
Switch off the appliance. Disconnect
■
the appliance from the power supply
(pull out the plug).
Never take hold of the mains plug
■
with wet hands.
When removing the mains plug from
■
the socket, always take hold of the
plug itself and never the mains
cable, otherwise this may damage
the mains cable.
Do not make any technical
■
modifications to the appliance or its
features.
Repairs and any other work on the
■
appliance must only be conducted
by our customer service or by an
electrician. The same applies for
replacing the mains cable (when
necessary).
Spare mains cables can be ordered
■
from our customer service.
:
Warning
Risk of poisoning!
Poisonous fumes may be given off by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.