Home Zone Security ELJ9542V Installation Instructions

Home Zone Security ELJ9542V Installation Instructions

Solar powered motion sensor wall light (2-pack)

Advertisement

Quick Links

IMPORTANT SAFETY OPERATING INSTRUCTIONS

1.
Please read all warning and instruction labels which are included in the box and fixture to avoid personal injury, property damage
caused by fire, cuts, bruises, death and other dangers.
2.
Please follow these general precautions before installing, maintaining, or fixing
1. The packing contains small parts that could be swallowed by children
2. Keep the packaging material away from children and pets
3. The solar light is not a toy
4. We do not take responsibility if the instruction manual is not followed correctly or if the product is handled
improperly resulting in damage to person or property

PRECAUTION

1.
It is important to select an outdoor location with full, direct sunlight where the solar panel can receive at least 8 hours of sunlight
each day.
2.
It is important to avoid placing the solar light by light sources, such as street lights or porch lights, which may cause the solar light
to turn off automatically.
3.
To avoid explosion and corrosion, please keep the solar light away from from fire and humid environment
4.
No striking to avoid any damages to solar cell

REF. PARTS

Solar Unit

PARAMETER

1.
Dimension: approx. W.3.27"(8.3cm) x H.5.12"(13cm) x D. 1.38" (3.5cm)
2.
Light source: 3pcs white LEDs
3.
Brightness: 5lumens for standby; 40lumens for motion sensor activated
Solar Powered Motion Sensor
1pc screws and 1pc plastic anchor
Wall Light (2-Pack)
Model No. ELJ9542V
(888) 782-5618

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ELJ9542V and is the answer not in the manual?

Questions and answers

Summary of Contents for Home Zone Security ELJ9542V

  • Page 1 Solar Powered Motion Sensor Wall Light (2-Pack) Model No. ELJ9542V IMPORTANT SAFETY OPERATING INSTRUCTIONS Please read all warning and instruction labels which are included in the box and fixture to avoid personal injury, property damage caused by fire, cuts, bruises, death and other dangers.
  • Page 2 Solar Powered Motion Sensor Wall Light (2-Pack) Model No. ELJ9542V HOW TO OPERATE AND INSTALL Figure 1 - Slide the switch to "AUTO" position Figure 2 Choose desired wall location. Drill one hole on the wall. Insert the plastic anchor and screw the screw into the wall, leaving 2mm long thread.

Table of Contents