Download Print this page

Sealey SDL6 Instructions page 2

Soldering iron rechargeable lithium-ion

Advertisement

Recycle or dispose of used battery as stipulated by local regulation.

If the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with cool
water and seek immediate medical attention
2. introduction
Professional Lithium-ion cordless soldering iron. Ideal for multiple applications including automotive soldering in and around engine bays. Much
safer than using conventional gas powered soldering irons. Powered using the latest Lithium-ion battery technology which enables faster heating
times and improved battery life. Heats up to maximum temperature in 25 seconds. Unit is charged and stored in the base and is supplied with a
mains charger.
3. specification
model no: ..................................................................... sdl6
Battery: ................................................................. 3.7V Li-ion
Power rating: . ....................................................................6W
maximum temperature: ................................................ 510°C
charging time: . ...............................................................3-4hr
operating time: ............................................................ 75min
replacement soldering tips:
conical tip: .............................................................. SDL6.CT
flat chisel tip: ...........................................................SDL6.FT
4. operation
4.1.
Plug in charger and ensure soldering iron is fully charged before first use. The red charging light will turn green when fully charged.
Once charged the soldering iron can be used without the charge lead connected.
4.2.
to switch on remove the soldering iron from the charging dock, slide the on/off switch forward and press down until the red 'on'
4.3.
indicator illuminates.
4.4.
The soldering iron will begin to heat up and will be ready to use in 25 seconds.
4.5.
When soldering is finished place the soldering iron back in its charging dock and plug in the charger.
© Jack sealey limited
Original Language Version
sDL6 | Issue 1 17/06/15

Advertisement

loading