Advertisement
Description of parts
Before the first time you use your Double Hot Plate
Please read these operating instructions thoroughly and keep them in
a safe place for future reference.
Remove all packing materials and discard responsibly.
Before using your Double Hot Plate for the first time, turn the Hot
plate to the highest setting (5) for 3 to 5 minutes to condition the
protective coating.
NB This should be the only time the Double Hot Plate is operated
without a cooking utensil on it.
A pan 15 - 17cm in diameter is recommended for best results. Smaller
pans are not recommended. Ensure larger pans do not protrude
beyond the edge of the Hot Plates or the controls.
Operating Instructions
• Place the Double Hot Plate on a solid, level non-flammable surface.
• Ensure that Thermostat Controls are in the off
• Insert the mains plug into the mains socket.
• Rotate the Thermostat Control clockwise from 0 (low heat) through to
5 (high heat) and leave at the desired setting. The Neon Indicator will
light to show the hot plate is being heated up.
• Once the hot plate is at the correct temperature the Neon Indicator
will go out, the Neon Indicator will go on and off during use to show
the temperature of the hot plate is being maintained.
• Return the Thermostat control to the
mains plug from the socket after use.
Neon Indicators
position.
position and remove the
Double Hot Plates
Thermostat
Controls
Advertisement
