Pairing A Bluetooth Device - Salora SBO880 Instruction Manual

Pairing a bluetooth device

Before you can use the sound bar with your phone or other bluetooth capable device you will need
to pair the device to the sound bar.
Pairing a bluetooth device for the first time
1. Press and hold 3 seconds the POWER/SOURCE button on the unit or the POWER button on the
remote control to switch on the unit.
2. Select and press the SOURCE button directly on the remote control to enter bluetooth mode or
press the POWER/SOURCE button repeatedly to enter bluetooth mode, indicated by a blue light.
3. Press the PAIR button on the remote control or the unit directly. The pairing indicator will flash
quickly. When pairing, remain within 3 feet of the unit.
4. Using the native controls on your bluetooth device, select the "SBO880" in your bluetooth
settings to pair.
5. When successfully paired and connected, a beep will issue from the unit and the pairing indicator
will display a solid blue light. After initial pairing, the unit will stay paired unless unpaired
manually by the user, or until it is erased due to a reset of the device.
If your device should become unpaired or you find it is unable to connect, repeat the above steps.
1. The button on the main unit (3) or on the remote when pressed will begin playback of the
selected track on the audio device. Press again to pause playback.
2. To skip to the next track press the
3. To skip to the next track press the
4. Any further operations must be done from the audio device.
5. Soundbar has bluetooth connected to a device, you can press MUTE/PAIR button 3 seconds to exit
this device in order to pair the device with another bluetooth device. If your device should become
unpaired or you find it is unable to connect,repeat the above steps.
The volume output is effected by the volume level on the audio source EG: Phone or laptop, so make
sure that is set to about 70-80% (not too loud to avoid distortion).
Bluetooth notes
• The operation range of bluetooth is approximately 10 meters (30 Feet). Any obstacles in the path
between devices may reduce this range.
• Only one bluetooth device can be paired at a time.
• Not all bluetooth devices are compatible.
button on the remote.
button on the remote.
- 8 -