Table of Contents
Advertisement
Post-requisites
1. Replace the
display
assembly.
2. Replace the fan.
3. Replace the
wireless
card.
4. Replace the
base
cover.
Camera
Removing the camera
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the
base
cover.
2. Remove the
wireless
card.
3. Remove the
display
assembly.
4. Remove the
display
bezel.
Procedure
1. Using a plastic scribe, gently pry the camera off the display back-cover and antenna assembly.
2. Disconnect the camera cable from the camera module.
computer. After working inside your computer, follow the instructions in
Removing and installing components
After
63
Advertisement
Table of Contents
