Advertisement
DO NOT use the grinder for a task it is not designed to perform.
DO NOT operate the grinder where there are flammable liquids or gases.
WARNING! DO NOT grind or sand materials containing asbestos.
DO NOT get the grinder wet or use in damp or wet locations.
DO NOT switch the grinder on whilst the disc is in contact with the workpiece.
DO NOT cover the grinder air vents. To do so will overheat the machine.
DO NOT touch the workpiece immediately after grinding as it will be very hot.
DO NOT use the grinder as a fixed tool, and DO NOT try to cool the grinding discs with water or other lubricants.
DO NOT hold unsecured work in your hand and DO NOT touch the grinding disc whilst operating, or whilst plugged into the mains power.
DO NOT leave the grinder running unattended and DO NOT lay the grinder down whilst it is running.
DO NOT operate the grinder when you are tired or under the influence of alcohol, drugs or intoxicating medication.
When not in use, switch off the grinder, remove the plug from the power supply and store in a safe, dry, childproof area.
WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that
may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into
this product, but must be applied by the operator.
WARNING! The grinding process can produce streams of sparks (especially when grinding steel) which are a potential source of ignition.
DO NOT use the grinder where there are flammable liquids, solids or gases.
DO NOT allow grinder sparks to make contact with the operator's clothing or any other fabric such as cleaning rags. Fabrics contaminated
with inflammable materials such as petrol, oil, grease, paint and solvents are a particular fire hazard.
To reduce the risk of clothing catching fire the operator should wear wool or cotton outer garments treated with a fire retardant in
preference to man-made fibres.
2. INTRODUCTION
MODEL No SG125EU Suitable for a variety of trade applications. Features heavy-duty alloy bevel gear head with composite body casing and
spindle lock for fast loading/unloading of discs. 1000W Heavy-duty motor develops powerful 11000rpm (no load speed). Supplied with side handle,
guard and spanner. Fitted 3mtr power cable with Schuko plug. Grinding disc not included, order Model No. PTC/125G.
3. SPECIFICATIONS
SPECIFICATION - SG125EU
Power input . . . . . . . . . . . . . . . . . . .1000 watt
No-load speed . . . . . . . . . . . . . . . . 11,000rpm
Spindle size . . . . . . . . . . . . . . . . . . . . . . . M14
4. CONTENTS
Item
Description
1
Main unit
2
Safety guard c/w Fixings
3
Handle
4
Pin wrench
5
Clamping flange
6
Flange nut
fig.1
SG125EU
© Jack Sealey Limited
DANGER OF FIRE/EXPLOSION HAZARD
Grinding/Cutting disc max. diam . . . . . 125mm
Sound pressure level . . . . . . . . . . . . 89.4dB(A)
QTY
1 module
1-set
1
1
1
1
Original Language Version
Sound power level . . . . . . . . . . . . . 102.4dB(A)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . .2.4kg
SG125EU
Issue: 2 (L) - 28/08/15
Advertisement
