Advertisement
4. ASSEMBLY
4.1.
Assemble the cabinet, using the following diagrams and referencing the parts list/diagram overleaf.
4.2.
Insert and slide E2 front base bracket and f2 back base bracket into the bottom of B3 left side panel and B4 right side
panel. Attach with 1 screw J into each of the four corners. use a trestle table or a workbench for convenience (fig.1).
4.3.
Acquire the help of a second person for this stage. stand unit upright and insert H1 middle panel into the hole in E2
front base bracket. fix it in place using 1 J self tapping screw from the rear. Install c3 left back panel, and then c10
right back panel over the top of panel c3. use self tapping screws J to attach panels (fig.2) (NOTE - don't fix screws to
the top corners at this stage).
© Jack sealey Limited
Original Language Version
Fig.1
Fig.2
Gsc86335sP Issue: 1 - 16/07/12
Advertisement
