Advertisement
fig.2
ImPORTAnT WARRAnTY InFORmATIOn:
The battery fitted to this floodlight is considered to be a consumable item and its ability to accept charge will reduce over
time. We will warranty it against mechanical and electrical defect for a period of one year - this does not cover fair wear
and tear. If the battery is not properly charged before first use, or properly conditioned its capacity will diminish. Under
these circumstances we will not replace the battery even if it is less than one year old.
5. mAInTEnAnCE
5.1.
CHAnGInG THE BATTERY
WARnInG! Ensure that you read, understand and apply the safety instructions relating to the battery before changing it.
5.1.1. Ensure the floodlight is turned 'Off' before attempting to change the battery.
5.1.2. Undo the 5 retaining screws (fig.1.D) at the rear of the floodlight.
5.1.3. Remove the cover, carefully remove the glass and remove the LED panel from the floodlight body.
5.1.4. Undo the 2 battery retainer screws (fig.5.A) and remove the battery retainer.
5.1.5. Unplug the battery cable from the circuit board.
5.1.6. Remove the old battery and replace with a genuine Sealey battery and install by reversing the above procedure.
nOTE: Take care not to pinch any wires.
5.1.7. Dispose of old batteries in accordance with local authority battery regulations. DO nOT dispose of with regular refuse.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycle centre and disposed of in a manner which is compatible with the environment.
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and
Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally
protective way. Contact your local solid waste authority for recycling information.
WARnInG! Ensure the floodlight is turned off before removing the battery.
Refer to Section 5.1 to remove the battery.
Dispose of batteries according to local authority guidelines.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak's
registered compliance scheme. Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
ImPORTAnT: No liability is accepted for incorrect use of this product.
WARRAnTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
InFORmATIOn: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Limited
fig.3
Environmental Protection
WEEE Regulations.
Battery Removal.
sales@sealey.co.uk or phone 01284 757500.
Sole uK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
fig.4
fig.5
01284 757500
01284 703534
www.sealey.co.uk
sales@sealey.co.uk
LED108CO
Issue: 1 - 14/04/14
Advertisement
