Dacor OBC36 Installation Instructions

OUTDOOR GRILL CART MODEL OBC36
WARNING:
• Since the cart and the grill are heavy, this installation process should be accom-
plished by a minimum of two people. Remove all individual components to lighten the
grill before installation. Remove the cart from the shipping pallet before installation.
• Sheet metal edges can be dangerous in heavy lifting situations. Please wear gloves
during installation.
• Attach the appliance to the cart with both of the supplied bolts before use.
• Read the use and care manual completely before operation.
• To avoid an explosion hazard, do not connect the cart or appliance(s) to electrical
power until after the gas supply system has been connected and checked for leaks.
• To avoid a fire hazard, keep the outdoor grill a minimum of 10" from combustible sur-
faces and 3" from non-combustible surfaces above the cooking surface.
NOTES:
• The Dacor cart ships assembled ready for installation of the outdoor grill.
• All gas and electrical connections should be made after the grill is installed and
bolted to the cart.
• Your cart is prepared for either natural gas or liquid propane (LP) gas connections.
However, it is important to verify that your outdoor grill was ordered correctly. If you
will be utilizing LP gas, your grill must indicate LP in the model number. Do not pro-
ceed with installation if the model is not correct. Field conversion from one gas type
to another is not permissible.
• Allow 26 inches in front to open drawers.
• To prevent damage to the regulator, connect it only after the outdoor grill is attached
to the cart.
• For proper grill and drawer operation, use the outdoor grill and cart only on a level
surface.
Outdoor Grill Cart for Outdoor Grill Models
OB36 and OBS36
INSTALLATION
INSTRUCTIONS
Part No. 102044 Rev. G