System Setting - Sencore OmniHub CMP203 User Manual

3.2.2

System Setting

This menu allows the user to configure:
Network
•
Time
•
System
•
Password
•
SNMP
•
Network tab allows user to assign a static IP address to CMP203 mainboard only. IP
addresses for boards/modules will be assigned automatically based on the address set
for the chassis. To avoid IP addresses conflict when you set baseboard IP address,
observe occupied IP section displayed in this page on the top blue area.
Click the Apply button on the right side to make the change takes effect.
Time page allows user to check current system time, change Time Zone, choose system
time Mode (Manual or Automatic), enable/disable Auto Sync and modify NTP Server
Address in Automatic mode, change current system Time in Manual mode.
Page 21 of 109
OmniHub CMP203– User Manual