DK Digital LS-180 Owner's Manual page 6

Establish connection
Remove 2cm of insulation from the loudspeaker cable. To connect the cable, twist the flex.
Then open the loudspeaker clamp , stick the bared end of the cable - not insulated parts of
the cable - into the opening, and close the clamp.
Please carefully read the instruction manual of the respective amplifier to learn more about
the speaker connection.
You have paid attention to quality in your purchasing of loudspeakers and you should also
do this when choosing the loudspeaker cable. The cross-section and conductor material
play a decisive role in the later musical pleasure.
6