Draper Slimline 65421 Manual
  1. Manuals
  2. Brands
  3. Draper Manuals
  4. Lighting Equipment
  5. Slimline 65421
  6. Manual

Draper Slimline 65421 Manual

Inspection lamp
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SLIMLINE
INSPECTION LAMP
65421
These instructions accompanying the product are the original instructions. This document is part of the product, keep
it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Slimline 65421 and is the answer not in the manual?

Questions and answers

Related Manuals for Draper Slimline 65421

Summary of Contents for Draper Slimline 65421

  • Page 1 AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.

  • Page 2: Copyright Notice

    Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact.

  • Page 3: Table Of Contents

    CONTENTS TITLE PAGE 1.1 INTRODUCTION......................2 1.2 REVISION HISTORY ....................2 1.3 UNDERSTANDING THIS MANUAL ................2 1.4 COPYRIGHT NOTICE....................2 CONTENTS 2.1 CONTENTS ........................3 GUARANTEE 3.1 GUARANTEE ....................... 4 INTRODUCTION 4.1 SCOPE......................... 5 4.2 SPECIFICATION ......................5 4.3 HANDLING AND STORAGE ..................5 HEALTH AND SAFETY INFORMATION 5.1 GENERAL SAFETY INSTRUCTIONS ..............4-5 –...

  • Page 4: Guarantee

    This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period.
  • Page 5 HEALTH AND SAFETY INFORMATION d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

  • Page 6: Handling And Storage

    High ......................... 230 lumens Low..........................70 lumens Dimensions......................... 55x40x290mm 4.3 HANDLING AND STORAGE Do not drop the inspection lamp as this can damage and shorten the life span of the unit. Store in a dry location as damp conditions can damage the inspection lamp. Charging on a regular basses in advised to prolong the life of the battery cells.

  • Page 7: Connection To The Power Supply (Chargers)

    – Only use the charger in a standard environment. – Do not use the charger to charge any other product and only use the supplied charger to charge this inspection lamp. 5.3 CONNECTION TO THE POWER SUPPLY (CHARGERS) Make sure the power supply information on the machine’s rating plate are compatible with the power supply you intend to connect it to.

  • Page 8: Technical Description

    Carefully remove the inspection lamp from the packaging and examine it for any sign of damage that may have happened during shipping. If any part are damaged or missing; please contact the Draper Helpline (the telephone number appears on the Title page) and do not attempt to use the lamp.

  • Page 9: Assembling The Inspection Lamp

    ASSEMBLING THE INSPECTION LAMP 8.1 POWER SUPPLY Before you connect the equipment to the power supply make sure that the data on the rating plate is identical to the supply voltage. Warning! Always pull out the power plug before making adjustments to the equipment. Warning: Do not connect the machine to the power supply before the product is completely assembled.

  • Page 10: Inspection Lamp Instruction

    INSPECTION LAMP INSTRUCTION 9.1 OPERATION CAUTION: Never shine the LED light directly into your or any one else’s eyes. To run through the sequence of modes (UV LED, 3 Watt COB on high, on low and off). Press the on/off button.

  • Page 11: Explanation Of Symbols

    11. EXPLANATION OF SYMBOLS 11.1 EXPLANATION OF SYMBOLS Class II construction (Double 230V charger adaptor insulated). WEEE Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish. Lithium-ion product. Refer to your local authority for advice on disposal and recycling. For indoor use only.
  • Page 12 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.

Table of Contents