Operation - ION Party Float Quick Start Manual

11. Light Mode: Press this button to cycle through the available light modes:
•
Color Cycle: The lights slowly glow and cycle through colors. Press and hold the light
mode button to freeze the lights on one color.
•
Red/White/Blue: The lights all glow red for one second, followed by white then blue.
•
Beat Sync: The lights react to the beat of the music.
•
Off: The lights turn off. This is the default mode when Party Float is first powered on.
12. Auxiliary Input*: This stereo 1/8" (3.5 mm) input can be used to
connect a CD player, MP3 player, or other audio source.
13. USB Charge Port*: Connect your smartphone's charge cable here
to charge it. In order to charge a device, Party Float needs to be
powered on.
14. Power Cable Input*: Insert the included power cable here to
charge Party Float. Make sure Party Float and its connections are
dry before charging. Never charge when wet.
*IMPORTANT:
•
Cover the Aux In, USB port and Power Cable Input with the cap in the locked position
when using Party Float in water.
•
Make sure Party Float and its connections are dry before charging. Never charge when
wet.
•
The sealing cap also features a hole in the handle which can be used to anchor Party
Float in water. Do not use the anchor point to carry or suspend Party Float, as this may
damage the cap.
•
When using the cupholders or pong tray, inserting heavy containers may cause Party
Float to tip slightly.

Operation

Pairing or Disconnecting a Bluetooth Device
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
To pair a Bluetooth device:
1. Turn on your Bluetooth device.
2. Power on Party Float and it will automatically go into pairing mode to search for
Bluetooth devices. You will know you are in pairing mode when the Bluetooth LED is
slowly flashing.
3. Navigate to your Bluetooth device's setup screen, find Party Float and connect.
Note: If your Bluetooth device prompts for a pairing code, enter 0000.
To disconnect a Bluetooth device:
1. Press and release the Bluetooth button to disconnect a paired Bluetooth device.
2. To connect to another Bluetooth device, repeat step 3 above.
12 13 14
5