Table of Contents
Advertisement
The system can also be programmed to arm the optional Failsafe
Starter Kill automatically (called Passive Mode). If the system has
been programmed for Passive Mode, the Failsafe
automatically activate 30 seconds after the ignition has been
turned off. After the ignition has been turned off, the status LED
will flash rapidly to indicate that the system is in Passive Mode.
If Passive Mode has been programmed on, then it is also possible
to program the system for Passive Locking. With Passive Locking,
the vehicle doors lock automatically at the same time that the Failsafe
Starter Kill is activated. If Passive Locking is programmed on, care
must be taken to prevent the keys from being locked in the vehicle.
N N O O T T E E : : For Passive Mode to be effective, the Failsafe
must be installed.
D D i i s s a a r r m m i i n n g g
Pressing
for one second disarms the system and unlocks the
doors (if connected). The horn will honk twice (if connected) and
the parking lights will flash twice to confirm disarming of the sys-
tem. The optional Failsafe
tus LED will turn off, unless the system is programmed for Passive
Mode. In Passive Mode, the status LED will flash rapidly when the
system is disarmed. This indicates that the system will re-engage
the starter kill and re-lock the doors (if Passive Locking has been
programmed) in 30 seconds unless the ignition is turned on.
2005 Directed Electronics—all rights reserved
©
®
Starter Kill will be deactivated. The sta-
®
Starter Kill will
®
Starter Kill relay
®
®
9 9
Hide quick links:
Advertisement
Table of Contents
