Advertisement
Plug in and switch on the power supply. Press the
on button, the neon light will come on and your
kettle will boil and switch off automatically. You can
use the on / off switch to turn off your kettle at any
point during boiling.
IMPORTANT: CARE MUST BE TAKEN WHEN
POURING WATER FROM THE KETTLE. IF THIS
IS DONE TOO QUICKLY, WATER MAY ESCAPE
FROM AROUND THE LID.
Always ensure that there is water in the kettle.
Always unplug the kettle after use.
If you find drops of water under your kettle, don't
worry - it is just condensation.
This kettle works with all world voltages however
optimum performance will be achieved when used
at 230V.
7
Advertisement
