Starting To Sew - Necchi NC-102D Instruction Manual

Starting to sew

Make sure you follow the needle/fabric/thread combinations and use the suggested
presser foot before sewing.
OFF
1
1. Turn the power switch to on ("I").
ON
2. Press the needle up/down position button
3. Raise the presser foot lifter. Select a
4. Place the fabric under the presser foot,
5. Turn the handwheel toward you (counter-
6. Lower the presser foot lifter.
38
to bring the needle to highest position.
stitch.
pass the thread under the presser foot,
and then pull out about 10cm of thread
toward the rear of the machine.
①
10cm
clockwise) to lower the needle into the
fabric at the beginning of the stitching.