Straight Stitch; Changing The Needle Position - Necchi NC-102D Instruction Manual

Straight stitch

Using the all purpose foot.
00 01 02 03 04
Set the stitch as shown in figure.
The stitch length can be regulated by pressing
the stitch length adjustment button.
For a shorter stitch, press the "–" button. For
a longer stitch, press the "+" button.
Generally speaking, the thicker the fabric,
thread and needle, the longer the stitch length
should be.
v Changing the needle position
The needle position for straight stitches can
be changed by adjusting the stitch width
adjustment button.
The pre-set position is "3.5", center position.
Press the stitch width adjustment button "+",
the needle position will be moved to the right.
Press the stitch width adjustment button "–",
the needle position will be moved to the left.
36