3. OPERATION INSTRUCTION
2.Spot Mode
Press the spot cleaning button, it will clean the area within 1m2 and clean by spiral mode.
It will automatic operate in around 2-3 minutes.
3. Mopping Mode
Press "
" button, it will switch to mopping mode, and under this mode the vacuum cleaning mode
will stop working. (No suction power and fabric brush stop running). Mopping routes as following:
4. Lowspeed Mode
Press "
" button on remote controller, the unit will switch to low speed mode, "
not show on LED display any more. Press"
5. Full - Go Mode
The unit will start auto cleaning after fully charge, and will return to charging station when battery
low, and will operate after full charge and repeat again.
1.Press the "
" button on remote control
2.And press the "
FULL-GO
symbol display on screen, the full-go function will be activated.
3.You can press "
4.Full-go function cannot work with Timer function. These two function have separate use.
"button again then will switch back to normal mode.
Setting the Full-Go Function
" button on remote control, the full-go"
" button to cancel the current setting.
"
7
" symbol will