Download Print this page

Kaboodle corner base cabinet Quick Start Manual page 3

900mm

Advertisement

B
28mm
wood screws
Installing adjustable shelf
1.
E
joining cabinets & fixing cabinets to wall
1.
Check that all cabinets are level.
Clamp cabinets and pre-drill screw holes.
Caring for your kaboodle cabinets
Looking after your cabinets is really easy and with the right care and maintenance they
will last you for many years. Just follow these simple steps and if you need any more
information you can contact us us: Australia: 1800 666 078 Monday to Friday between
8:00am and 6:00pm AEST. New Zealand: 0800 522 663 Monday to Friday between
8:00am and 5:00pm NZST or email: info@kaboodlegroup.com.au.
Clean your cabinets with an all purpose, non-abrasive cleaner with a damp sponge or cloth
and make sure you never use saturated cloth, harsh chemicals or thinner based cleaners
as these will damage the surface of the melamine. Likewise, never use products that will
scratch the surface like steel wool or wire brushes and avoid sharp objects that will scratch,
cut or gouge the melamine surface. If this happens the internal board will be exposed and
may swell. Kaboodle cabinets are water resistant but not water proof so any spills should be
attended to immediately.
Handy hint: if the melamine surface of your cabinet is damaged you can try and cover it
with a furniture repair crayon but just remember that this won't seal the board back to its
original finish.
We offer a dedicated customer service line
for advice or any questions you may have
on kaboodle products.
E
shelf
support
2.
When you need to add an end
panel check out the end panel
instructions for installation tips.
Clamp cabinets and pre-drill screw holes.
Call customer service on:
Australia: 1800 666 078 Monday to Friday
between 8.00am and 6.00pm AEST
New Zealand: 0800 522 663 Monday to Friday
between 8.00am and 5.00pm NZST or email:
info@kaboodlegroup.com.au
900mm corner base cabinet
3.
Cabinet complete R
plaster board
B
Caution: Please ensure all cabinets
are screwed into your timber stud wall
using a minimum of 65mm timber
screws. If attaching to concrete, brick,
steel or any other substrates seek
advice from your hardware specialist.
step 1
Your Kaboodle
cabinet is now
complete.
step 4
Finish off your
Kaboodle Kitchen
by installing your
benchtop.
step 3
Then follow the
instructions to fit
your doors and
panels.
stud
step 2
Next grab your
parts and
accessories
instructions.
W-51608
Ver. 9
p. 3

Advertisement

loading