Connecting To The Battery - Shark 800-00-36 User Manual

6 Fast flash
7 Off
8 Off

CONNECTING TO THE BATTERY

1) Identify polarity of battery posts. The positive battery terminal is typically marked
by these letters or symbol (POS,P,+). The negative battery terminal is typically
marked by these letters or symbol (NEG,N,-).
2) Do not make any connections to the carburetor, fuel lines, or thin metal parts.
3) Identify if you have a negative or positive grounded vehicle. This can be done by
identifying which battery post (NEG or POS) is connected to the chassis.
4) For a negative grounded vehicle (most common): connect the RED POSITIVE
jumper clamp first to the positive battery terminal, then connect the BLACK
NEGATIV jumper clamp to the negative battery terminal or vehicle chassis (if you
Off Fast buzzer
Fast flash No buzzer
Fast flash No buzzer
6
are connected with each
other.
Reverse connection of
clamps.
Engine is started.
Vehicle's battery voltage
is higher than Jump
Starter's.