Outbound 076-5460-4 Owner's Manual page 3

Step 5: Fasten hooks and stake screen house
1) Clip the plastic hooks on the screen house to the fibreglass pole frame.
2) Stake down the screen house by inserting a stake through the stake loops, located along the
perimeter of the screen house.
3) Position the poles so the sod cloth around the perimeter of the screen house is taut but
remains on the sod. Make certain the perimeter is even and squared.
4) Hammer the stakes into the ground at a
Step 7: Fully assembled
Screen house appears as shown.
angle using a hammer or mallet.
45°
Step 6: Secure guy lines
1) Secure screen house using all guy lines and stakes.
Screen house must be secured for proper function.
Step 8: Disassembly
1) To take down the screen house, disassemble
in reverse order.
2) Be sure to leave doors and windows
unzipped to avoid zipper damage.
3) Remove stakes with hammer or stake
puller. DO NOT pull on tent.
4) Carefully disengage poles from pins. Push
poles away from you through the sleeves
to minimize risk of damage to tent or poles.
5) Keep poles and stakes together in bags
provided.
Step 9: Packing the screen house
1) Spread screen house flat, distribute evenly.
2) Fold into quarters not to exceed the length
of pole bag.
Dimension A should
Fold tent into a
be close to but not
A
rectangular shape.
exceed the length
of the pole bag.
3) Lay pole bag at opposite end from door.
Tightly roll bag and skin forcing air through
unzipped door.
Front of tent
(door unzipped)
4) Secure with ties and place in carry bag with
stakes and accessories.
5) Screen house must be clean and dry before
storage. Do not store on concrete floor.
Be certain campfires are extinguished.
Dispose of garbage appropriately.
CTC161212SH 05/15