Table of Contents
Advertisement
2. Release the burner injector with a 7 mm socket
spanner and replace it with a right one.
3. Assemble the burner in a reverse sequence.
Before you fix the screw, make sure that the
burner is pushed correctly to the back panel.
Test the grill injectors.
LEVELLING
CAUTION! Remove all the
accessories from the oven.
1. Open the lid of the appliance and disassemble
it.
2. Disassemble the pan supports and all the
burner assemblies.
A
3. Put the appliance on the sidewall on a clean
and smooth surface. Place each foot into a
separate hole, in the plinth, and rotate it
clockwise.
4. If the floor is not equally flat, use the adjustable
feet on the bottom of the appliance to set a
stable position for the appliance.
B
25
Advertisement
Table of Contents
