Advertisement
PROBLEM
1-Dishes are not clean.
2-Dishes are getting broken.
3-The device does not take water.
4-The device continuously takes
water.
5-There is rusting on the device
surface
POTENTIAL PROBLEMS - CAUSES - SOLUTIONS
-Washing arms may be stuck.
-Washing water sprays may be
blocked.
-Rinsing water sprays may be
blocked.
-Detergent concentration may be
very high or insufficient.
-Filter may be blocked.
-Washing time may be insufficient
-Proper tray may not have been
used.
-Machine may have been
overloaded.
-Water inlet valve may be closed.
-Cover may not be closed
completely.
-Solenoid valve may be broken.
-Pressure stat may be defective.
-Pressure stat hose may have
taken in air.
-Improper chemical materials
may have been used.
CAUSE
SOLUTION
-Check whether the dishes
prevent arms from rotating.
-Clean the water sprays by
removing the washing arm.
-Clean the water sprays by
removing the rinsing arm.
-Check the hardness of water.
-Check the detergent amount.
-Remove and clean the filter.
-Select a longer wash period or
repeat the same period.
-Be careful when selecting the
tray.
-Comply with its capacity.
-Check/Open
-Check/Close
-Notify the authorized service.
-Notify the authorized service.
-Empty the water inside the tank
and restart the device.
-Clean the device according to
the instructions for use
17
Advertisement
