Table of Contents
Advertisement
6. Installer Information
6.1 Installer menu
DIGI CLOCK: Shows the current time (hours/minutes) in a digital and analogue clock format
Setting possibilities:
NO: Digital clock not shown (Default value).
YES: Digital clock shown. If digital clock is set YES, you can choose between 12 HRS (AM-PM) or
24 HRS format.
BACKLIGHT: Setting possibilities:
PERMANENT ON: Backlight always ON.
PERMANENT OFF: Backlight always OFF.
BUTTON PRESSED: Backlight ON when any pushbutton is pressed. Backlight goes OFF 20
seconds after the last button press (Default value).
S/W CHANGE: Automatic Summer/Winter time change. Summer time starts on the last Sunday of
March (1:00 am to 2:00 am) and ends on last Sunday of October (2:00am to 1:00am), then Winter
time starts.
Setting possibilities:
ON: S/W time change will be done automatically (Default).
OFF: S/W time change must be done manually.
PROG TYPE: Menu to select daily, week-weekend, weekly programming. This value will be
applied by central heating programming method.
Setting possibilities:
Daily: All days (Monday - Sunday) are programmed with the same ON/OFF time schedule.
Weekly: You can program each day (Monday, Tuesday, ...) with a different ON/OFF time schedule
5-2: You can program Monday - Friday with a ON/OFF time schedule and Saturday - Sunday with
a different one.
NR PERIODS: The number of adjustable time periods defined by ON-OFF pairs to control the time
programmes.
Setting possibilities:
3 ON-OFF: adjust maximum 3 ON-OFF time periods (Default value).
2 ON-OFF: adjust maximum of 2 ON-OFF time periods.
DEFAULT PRGS: Time programme that will appear by default when running in AUTO mode or as
base point to customize according to users lifestyle.
Setting possibilities:
STD
HOME
ECO
For detailed explanation of the profiles, see Section 4.1 "Running a default programme"
RESET: Reset all parameters of installation menu to factory default.
To leave the installer's menu press the + key.
18
EcoBlue Accessories
7212551
Advertisement
Table of Contents
