DWL-G650M User's Manual
Configuration
Wireless Mode:
Preamble:
Power Mode:
D-Link Systems, Inc.
The Service Set Identifier is the name assigned to the wireless
SSID:
network. The factory SSID setting is default.
Either Infrastructure or Ad-Hoc will be displayed here. (Please see
the Getting Started section in this manual for an explanation of these
two modes.)
Channel:
The channel selection is automatically determined by the
DWL-G650M. When in Ad-Hoc mode, you may select a channel
manually. The default channel is 6.
The default setting is Auto. These settings are automatically
Tx Rate:
determined for the maximum wireless signal rate.
Preamble Type - By default the preamble is set to Short and Long
Preamble . The preamble defines the length of the CRC block
(Cyclic Redundancy Check) used in communication between the
access point and the wireless network adapters. CRC is a common
technique for detecting data transmission errors. High traffic
networks should use the shorter preamble type. The
DWL-G650M will automatically determine the best Preamble length.
Continuous Access Mode is the default setting. For best results leave
this setting at the default.
Using the Configuration Utility
14