Advertisement
Quick Links
SH-BLOX-ST24XX
THANK YOU FOR CHOOSING XYLEM
Please take a few minutes to review this manual before you start installation. If you encounter any installation problems, please don't
hesitate to contact us. Before you begin, please observe all local building codes. Unpack the new product and inspect for damage.
The appearance of your vanity may differ from the illustrations in this guide. This instructions still apply. Please ensure the finished wall
is straight and plumb and the floor is flat and perpendicular to the finished wall.
SUGGESTED TOOLS AND MATERIALS
Philips Screwdriver
ROUGH-IN DIMENSIONS
5-1/2"
(140mm)
FLOOR
TM
SH-BLOX-ST30XX
Level
Model #
X (inch)
SH-BLOX-ST24XX
24"
SH-BLOX-ST30XX
30"
SH-BLOX-ST36XX
36"
X
SUGGESTED HEIGHT:
INSTALLATION INSTRUCTIONS
Drill
Tape Measure
Application
Y (inch)
Vessel
25.5"
BLOX
SH-BLOX-STxxXX
SH-BLOX-ST36XX
10'
Safety Glasses
FINISHED
21-1/2" (546mm)
Y (inch)
TM
CONSOLE
WALL
Advertisement
Related Manuals for Xylem SH-BLOX-ST24 Series
Summary of Contents for Xylem SH-BLOX-ST24 Series
- Page 1 SH-BLOX-ST30XX SH-BLOX-ST36XX THANK YOU FOR CHOOSING XYLEM Please take a few minutes to review this manual before you start installation. If you encounter any installation problems, please don’t hesitate to contact us. Before you begin, please observe all local building codes. Unpack the new product and inspect for damage.
- Page 2 • Clean up excess water and spills immediately. Use blotting rather than a wiping action. Water left over a long period of time will cause white spots in the finish. Please note that some chemicals may damage the finish. Rev 2/10 For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time...