Table of Contents
Advertisement
N6066_UG_EN_FCC_060831.fm Page 66 Friday, September 1, 2006 11:26 AM
S e t t i n g s
1. In the standby mode, press and hold the right selection key or voice key.
2. With
Speak now
displayed, pronounce the voice tag clearly into the
microphone.
With the voice tag found, the device displays Found:, and plays the recognized
voice tag through the earpiece. The function you requested is activated.
Options
After you have associated a voice tag to a command, you can select one of the
following options:
Playback—Listen to the voice command tag.
Change—Change the voice command.
Delete—Erase the voice command tag.
■ Call settings
Anykey answer
Anykey answer enables you to answer an incoming call. Briefly press any key
except the right selection key or end key.
In the standby mode, select
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your device redials the
number (number of times is specified by the network), and notifies you when the
network is available.
In the standby mode, select
Off.
Speed dialling
You can activate or deactivate speed dialling. In the standby mode, select
Menu
>
Settings
>
Call
>
p. 46.
66
Menu
>
Settings
>
Call
>
Anykey answer
Menu
>
Settings
>
Call
>
Automatic redial
Speed dialling
>
On
or Off. See "Set up speed dialling,"
>
On
or Off.
>
On
or
Advertisement
Table of Contents
