Link Info - D-Link DWL-AG132 Manual

DWL-AG132 User's Manual

Link Info

Frequency: 802.11b indicates that the DWL-AG132 is communicating in the
Wireless Mode: Either Infrastructure or Ad-Hoc will be displayed here. (Please see
Encryption: You can see if WEP (Wired Equivalent Privacy) is Enabled or
Connection Info: Displays the adapter's connectivity to the network.
D-Link Systems, Inc.
Status: Displays the MAC address of the access point or router to which the
DWL-AG132 is associated.
The Service Set Identifier is the name assigned to the wireless
SSID:
network. The factory SSID setting is default.
2.4GHz band.
the Getting Started section in this manual for an explanation of these
two modes.)
Disabled here.
Tx Rate: The default setting is Auto; Tx Rate settings are automatically
determined for a maximum wireless signal rate of up to 54Mbps
(108Mbps* in Turbo mode).
Using the Configuration Utility
13