Novoferm NovoDock L320e ECO Assembly Instructions Manual page 10

5.5
EN
5.6
8
*
**
Instruction: Pull out the crossbeam to the front, out of its cylinders, until you reach the right position.
This position is achieved when the flat top of the leveller is completely horizontal with the lip folded in
vertically. Note that the crossbar should not extend outside the pit.
The material thickness of the filling plates used for height adjustment must be adapted on site.
** not included in scope of supply
General instruction: the image may differ at detail level.
This installation manual must be given to the customer and kept safely during the entire period of use!
**
Instruction: The hinged lip is to be secured against falling down
in an appropriate manner! Use a wooden beam or similar.
Then pull out the crossbeam to the front.
** not included in scope of supply.
General instruction: the image may differ at detail level.
*
*
min. 10 mm
max. 30 mm