D-Link AirPro DWL-5000AP Manual page 16

Using the Configuration Utility (continued)
General Configuration
In this window you can make changes to the default settings, if you wish.
D-Link 802.11a AirPro products network together, out of the box, with the
default settings. No configuration is needed. All computers on the network
must be within the same IP Address range, and have the same settings for
the Radio Channel, Turbo Mode and SSID in order to communicate.
• To make changes, enter the changes in the appropriate fields and
click Update.
• To create Advanced settings, click Advanced.
• If you need help, click Help in any Configuration window.
• To accept these Default Settings, make no changes in this window.
To view another Configuration window, click Shared Keys, near the
top of the window.
16