Hardware Installation - D-Link DRW-100U User Manual

Hardware Installation

This section will cover the steps for installing the CD-R/RW. Follow
these steps in order.
1. Connect the power adapter plug to the CD-R/RW and turn on
the power switch (Figure 5-9).
2. Turn on the computer to make sure the operating system has
started.
3. With the cables provided, insert plug B into the CD-R/RW USB
port as shown below in Figure 2.
To connect the CD-R/RW to the computer, insert plug A
4.
into the PC or NB USB port as shown in Figure 3.
(Figure 1)
3