Page 1: Table Of Contents
Manual for Eagle 100 and Lynx 500 This manual will help you installing, uninstalling and how to connect to a wireless network in diﬀerent operating systems. USB cradle usage/ placement ..............Download driver ................Installation of driver in Windows 7 / 8 ..........
Page 2: Usb Cradle Usage/ Placement
In the giftbox you will find a USB cradle/adapter. To get the best signal/connection you can use the USB cradle. This will allow you to place the Eagle 100/Lynx 500 a place where signal receiption is better. Download driver On our website www.jensenscandinavia.com/downloads...
Page 3: Installation Of Driver In Windows 7 / 8
Installation of driver in Windows 7 / 8 Important! Do not connect the Eagle 100/Lynx 500 until the driver is fully installed. * If you have downloaded driver from our webpage you can run the setup.exe from within the folder you unzipped the driver to.
Page 4: Installation Of Driver In Windows 10
Installation of driver in Windows 10 Important! Do not connect the Eagle 100/Lynx 500 until the driver is fully installed. * If you have downloaded driver from our webpage you can run the setup.exe from within the folder you unzipped the driver to.
Page 5: Installation Of Driver In Mac Os X
Installation of driver in Mac OS X Important! Do not connect the Eagle 100/Lynx 500 before the driver is installed. Insert the driver CD, open Finder and go to the folder Mac -> OS X and open the folder for your OS X version * If you have downloaded the driver please run the file installer.pkg to start the installation.
Page 6: Installation Of Driver In Linux
7. If you have the Eagle 500 - enter sudo modprobe 8812au (and click Enter) If you have the Eagle 100 - enter sudo modprobe 8821au (and click Enter) The driver should now be installed and your Eagle 100/Lynx 500 is ready for use.
Page 7: Connect To A Wireless Network Using Windows 7
Connect to a wireless network using Windows 7 This guide show you how to connect to your Air:Link router based on the built-in wireless tool for Windows 7. In some cases your computer is delivered with a third party software from the computer manufacturer. If so, please contact the computer manufacturer support for more detailed information.
Page 8: Connect To A Wireless Network Using Windows 8
Nettverk á AirLink0F3EB6 3. Please enter the encryption key for your Jensen router and click Next. The encryption key can be found on top or under the router. Angi sikkerhetsnøkkelen for nettverket •••••••• The key is 8 digit with a mix of lower / upper case letters and numbers.
Page 9: Connect To A Wireless Network Using Windows 10
Be carefull to select the AirLink router that matches the network name of your router. 3. Please enter the encryption key for your Jensen router and click Next. The encryption key can be found on top or under the router.
Page 10: Connect To A Wireless Network Using Mac Os X
Connect to a wireless network using Mac OS X 1) Click the icon for the Wireless network Utility as shown above. 2) Click on the wireless network you want to connect to. 3) Enter the password of the wireless 4) Open the Wireless network utility again network and click Join.
Page 11: Uninstallation Of Driver In Windows
(*) the current driver. *) In the below instructions we are showing Lynx 500 as an example. The procedure for Eagle 100 is the same. 1. Download the latest driver for Eagle 100/Lynx 500 from www.jensenscandinavia.com/downloads...
Page 12: Uninstallation Of Driver In Mac Os X
1) Insert the CD (or go into the folder of the downloaded driver) and open the folder for your OS X version. 2) Run the file Uninstall.command 3) Enter the password for your OS X system (System password) and click Enter. The driver for Eagle 100/Lynx 500 will now be uninstalled. Page 12...
Page 13: How Do I Find Which Driverversion Is Installed
WEB page www.jensenscandinavia.com/downloads Click Control panel -> System -> Device manager. Open the Network card tab and then select Eagle 100/Lynx 500 Click the Driver tab. Here you will see which driver version that are currently installed. Page 13...

This manual is also suitable for:

Lynx 500

Jensen Eagle 100 Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Jensen Eagle 100

Summary of Contents for Jensen Eagle 100

This manual is also suitable for:

Table of Contents