- CBU Decree No. 22/1989 important. Coll., § 232, section (1) c) of up to 1,5% methane concentration. Source of the supplied compressed air must be stationed in a nonhazardous area. ver. 3.6.2015 www.permon.cz...
Secure hoses using the prescribed number of recommended hose clips and sockets prescribed for the type of hose. Do not release any joints that are under pressure. Always switch off the air supply and bleed hoses first. www.permon.cz SKA 12-B, D, DZ...
An integrated oiler ensures proper lubrication. MODEL LABELLING Machines are fitted with labels containing important SKA 12-B, 12-D and 12-DZ information. Keep these labels clean and readable at all vary in tool shank and tool times and order new ones as necessary.
Check-up on the state of the hammer regularly. a ring. Insert tool by tilting Hexagonal chuck in SKA 12-D and 12-DZ makes use of chisel type tools possible. The open screw retainer the latch and then close the can be used for wider chisels and facilitates faster tool retainer.
P A R T S L I S T PARTS LIST Pos. Item No. Title Standard Pick Hammer SKA 12-B Ø2ŘxŘ5 9410 522 9410 532 Pick Hammer SKA 12-D #22x82 9410 542 Pick Hammer SKA 12-DZ #22x82 Cylinder Subassy. Ø25xŘ5...