Advertisement
Quick Links
De Sisti Lighting S.p.a.
Via Cancelliera # 10a, 00040 Albano Laziale (Rome- Italy).
Tel. ..39/06/934991 Fax. ..39/06/9343489
U.R.L. Address: www.desisti.it E-mail address: desisti@desisti.it
REMBRANDT PICCOLO 1.200 w SE
Single ended Hot Re-strike Discharge FRESNEL SPOTLIGHT
MOD.2510
(MANUAL OPERATED)
MANUFACTURER
De Sisti Lighting S.p.a.
Via Cancelliera # 10a, 00040 Albano Laziale (Rome- Italy).
Tel. +39/06/934991 Fax. +39/06/9343489
U.R.L.: www.desisti.it
1. INTRODUCTION
Congratulations on your purchase of a REMBRANDT PICCOLO
Lighting . Our commitment to Total Customer Satisfaction and our consolidated experience and leadership in
design innovation and manufacturing of lighting products for the professional Entertainment Industry means
you can depend upon the quality of this product.
The REMBRANDT PICCOLO 1200 W SE is a compact, highly efficient fresnel lens Spotlight , using Single
ended Hot Re-strike metal halide discharge lamps having G38 base and LCL = 107 mm .
NOTE : Also available , on special requests , either a pole operated version , or a version with connector of
type German STD M1 .
2. YOKE AND ACCESSORIES ASSEMBLY
INSTRUCTION MANUAL
desisti@desisti.it
E-mail:
REPRESENTATIVE
1200 W SE lighting fixture from De Sisti
Pag 1.
Revised 23 June 2000
Advertisement
Related Manuals for De Sisti REMBRANDT PICCOLO 1.200 w SE
Summary of Contents for De Sisti REMBRANDT PICCOLO 1.200 w SE
- Page 1 1. INTRODUCTION Congratulations on your purchase of a REMBRANDT PICCOLO 1200 W SE lighting fixture from De Sisti Lighting . Our commitment to Total Customer Satisfaction and our consolidated experience and leadership in design innovation and manufacturing of lighting products for the professional Entertainment Industry means you can depend upon the quality of this product.
- Page 2 Professional use: This luminaire has been designed for professional use and must be operated by qualified personnel only. Not for residential use. Grounding: This luminaire is used only with De Sisti ballast . THE BALLAST MUST BE GROUNDED . Electrical connections : •...
- Page 3 B - The ballast is suitable for the electrical mains ( Voltage & Frequency ) . C – The ballast is properly earthed ( use the ground continuity test present on De Sisti ballast ) and the ballast main switch is in OFF position .
- Page 4 This frequency may need to be increased if rough or unknown (eg. rental) treatment is incurred. Replace only with original De Sisti Lighting spare parts. Non-original cables may not withstand the thermal and mechanical conditions of use B.