LOXONE MUSIC SERVER 4+ Manual

Advertisement

 
LOXONE MUSIC SERVER 4+
Art. No.: 200167
ATTENTION
Your new Music Server is set up at the factory to start CasaTunes right out of the box. All access
to your Music Server will normally be through the remote User Interface and remote setup
program, CasaSetup (see your Quick Start guide). If you decide to hook up a monitor and
keyboard/mouse to the Music Server, you should be aware of the following:
● The UserName is "Loxone" with no password and the ComputerName is "MusicServer". We
strongly recommend that you leave it this way, since most home networks are behind
routers and the CasaTunes Music Server is not usually at high risk. If you are worried about
security and decide to add a password to your server and/or change the ComputerNameor
UserNames, please see
● The Time and Calendar are set up correctly for Vienna (UTC +01:00) Time Zone. If your
time is not correct, please reset the time zone to your correct time zone before changing
the time.
● Windows Update is set to not automatically update Windows. We did this so the Music
Server won't unexpectedly reboot while your are listening to your music. You can change
this setting by clicking the Windows Start button and typing Windows Update <enter> in
the "Search programs and files".
● Windows Media Player is set to automatically "rip" music on CDs inserted in the CD/DVD
drive with high quality, but not lossless, settings. To change these settings, open Windows
Media Player, tap the Alt key, click on Options and select Tools.
● iTunes is installed. If you plan on using iTunes, you should open iTunes, sign in with your
account name and set up iTunes for your particular preferences. You will most likely want
to change Windows Media Player so that it does not automatically rip music when CDs are
installed, so that you can set up iTunes to do this.
● We highly recommend that when you add music to your Music Server, you place the music
in the Music Folder. It is best to organize your music in folders by Artist and Album. If you
have a large number of songs to add to the Music Server and they are not separated by
folders and you are using iTunes, see our "sticky" at www.loxone.com/help/music-server.
Also, make sure you have album names in the "Album" field for all of your songs in iTunes,
see
www.loxone.com/help/music-server
● your new Music Server is a reliable source of whole house music. To keep it that way, we
strongly recommend not installing and running other software.
 
 
 
 
www.loxone.com/help/music-server
for details.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MUSIC SERVER 4+ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for LOXONE MUSIC SERVER 4+

  • Page 1 Music Server, you should be aware of the following: ● The UserName is “Loxone” with no password and the ComputerName is “MusicServer”. We strongly recommend that you leave it this way, since most home networks are behind routers and the CasaTunes Music Server is not usually at high risk.
  • Page 2 REMOTE SETUP This will allow you to plug our Loxone Music Servers into your clients Local Area Network (LAN) and set it up from your laptop. Follow the Quick Install Guide for wiring the Loxone Music Server. You will not need to connect the Monitor or a Keyboard/Mouse.
  • Page 3 QUICK START Loxone Music Server 4+ powered by CasaTunes ™    Hardware Installation        1. Plug an Ethernet cable from your Loca Area Network (LAN), with internet access, into  the “Ethernet” at the back of the chassis  2. For each room, plug one of the included audio cables between the Music Server and  your amplifier or AV Receiver Line input, if you are feeding a Home Theater. See photo  above.    ● Room 1 = Green (onboard sound)  ● Room 3 = Orange (onboard sound)  ● Room 2 = Black (onboard sound)  ● Room 4 = Blue (onboard sound)  ● Room + = Digital Optical Out      3. If you are using an amplifier with a trigger input, connect the included stereo cable with  3.5mm plugs on the both ends, between the Loxone Music Server 4+ and the amplifier.  Note: do not substitute with a mono cable, A mono cable will not allow the system to  power up. ...
  • Page 4 1. You can run CasaSetup remotely on any computer connected to the LAN.  2. 2. To run CasaSetup, start the browser of your choice (Safari, Internet Explorer 8 or  higher, Firefox, Opera or Chrome) on your computer. If using a Windows PC, enter  http://MusicServer/CasaSetup into the browser. On a Mac enter  http://MusicServer.local/CasaSetup. If the browser does not connect to the Music  Server, check to make sure the Music Server is connected to the same network as your  computer (you should see little lights flashing where the network cable is plugged into  the Music Server).  3. Some networks are set up too securely for this to work properly, in which case, if you  know the IP address of the server you can enter http://serverIP/CasaSetup where  serverIP is the IP address of the server.  4. To manage the Loxone Music Server remotely, you can follow the directions on the                      ...
  • Page 5 Loxone Miniserver choose “Server communication” in the periphery tree click on “Musicserver” in the ribbon   Choose the new Loxone Music Server and define the properties Name IP adress an Port 8731 Now each object “Music Server Zone” is associated with that music server. The room must be the same name as in the Music Server itself (CAPS and spacing important).
  • Page 6 We recommend using 2 pushbuttons to control music in a room. The top button on a single click or hold will turn the music volume up. A double click will change the source. The bottom button on a single click or hold will turn the music volume down.

Table of Contents