Advertisement
ENGLISH
Thank you for purchasing this Tamron lens. Before using your new lens, please read the contents
of this Owner's manual to properly use the lens. Also, it will be important to read the manual of the
camera to which you will attach the lens.
After reading, store this Owner's manual in a safe place.
Please read also the document "Precautions for Safe Use of Tamron Lenses" supplied with the
lens for the detailed safety precautions to observe when using Tamron lenses.
•
Explains precautions that help to prevent problems.
•
Explains things you should know in addition to basic operations.
PART NAMES (Refer to Fig.
)
①
Lens hood
③
Hood locking mark
⑤
Hood release mark
⑦
Focal length scale
⑨
Focus ring
⑪
Lens-camera interface contacts
MAIN SPECIFICATIONS
Model
Focal Length
Maximum Aperture
Angle of View (diagonal)
Optical Construction
Minimum Object Distance （ MOD）
Maximum Magni cation Ratio
Filter Size
Length
Maximum Diameter
Weight
Lens Hood
•
Length : From tip of front element to mount surface.
•
Speci cations, appearance, functionality, etc. are subject to change without prior notice.
ATTACHING AND REMOVING THE LENS
Remove the rear cap of the lens. Align the lens attachment mark
camera, and then insert the lens.
Turn the lens clockwise until it locks.
To remove the lens, turn the lens in the opposite direction while pressing the lens release button
on the camera.
•
Turn off the power of the camera before attaching or removing the lens.
•
For details, please read the instruction manual of your camera.
SWITCHING FOCUS MODE (Ref. Fig.
Select the desired focus mode on the camera.
⑨
For manual focusing, turn the focus ring
For details, please read the instruction manual of your camera.
•
Under AF mode, there may be dif culty for autofocus to work depending on the subject.
ZOOMING (Ref. Fig.
)
⑥
Turn the zooming ring
to adjust the focal length (Zoom position) to a desired position.
LENS HOOD (Ref. Figs.
,
)
①
A bayonet-type lens hood
is provided as standard equipment.
We recommend shooting with the hood properly attached because the lens hood eliminates stray
light that may affect the picture.
IUsing the lens hood (Ref. Fig.
)
Align the hood attaching alignment mark
lens.
①
Rotate the hood
in the direction of the arrow until the hood locking mark
⑤
release mark
.
IStowing the lens hood (Ref. Fig.
①
You can stow the lens hood
by attaching it in reverse.
③
Align the hood locking mark
of the hood with the hood release mark
①
Rotate the hood
in the direction of the arrow until the hood attaching alignment mark
⑤
meets the hood release mark
.
•
Be aware that the perimeter of the photographed image may be darkened if the hood
attached properly.
USAGE PRECAUTIONS
An internal focusing (IF) system is employed to reduce the minimum focus distance. The angle of
•
view may be wider than that of lenses with other focusing systems when shooting at a distance
less than in nity.
The lens hood or the lens barrel may block the light from the ash. It is recommended to
•
perform trial shooting in advance.
Differences in the display systems of cameras may cause to show values different from the
•
maximum and minimum aperture values from the speci cations. This is not an indication of an
error.
Do not touch the lens-camera interface contacts with your ngers. Otherwise, it may cause a
•
malfunction.
If the temperature changes suddenly, condensation may form and cause malfunctions.
•
Never use benzene, thinner, or other organic solvents to clean the lens.
•
Store the lens in a clean and well-ventilated place.
•
For more details on the lens cleaning and storage, the compatibility with cameras, and other
•
support information see our website. https://www.tamron.jp/en/support/
②
Hood attaching alignment mark
④
Filter ring
⑥
Zooming ring
⑧
Focal length mark
⑩
Lens attachment mark
A047
70-300 mm
F/4.5-6.3
34˚21' - 8˚15'
10/15
0.8 m (31.5") (Wide) / 1.5 m (59.1") (Tele)
1:9.4 (Wide MOD) / 1:5.1 (Tele MOD)
ø 67 mm
148 mm (5.8")
ø 77 mm
545 g (19.2 oz)
HA047
⑩
and mounting mark on the
)
to acquire the desired focus.
②
of the hood with the hood release mark
③
meets the hood
)
⑤
of the lens.
Disposal of Electrical and Electronic Equipment in Private Households.
Disposal of used Electrical & Electronic Equipment (Applicable in the
European Union and other European countries with separate collection
systems)
This symbol indicates that this product shall not be treated as household waste.
Instead it shall be collected separately for the recycling of electrical and
electronic equipment.
If the new products are purchased, this product might be handed over to the distributor or
the collection system of waste electrical and electronic equipment eventually.
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product or components of this product.
If this product is disposed illegally, it might cause a possibility of penalties. For more detailed
information about recycling of this product, please contact your local Civic Of ce, your
household waste disposal service or the shop where you purchased the product.
⑤
of the
②
①
is not
Advertisement
