Add An Ip Sub Group - 8e6 Technologies ProxyBlocker User Manual

G A
ROUP DMINISTRATOR
352
S C 1: G
ECTION HAPTER
Add Sub Group

Add an IP Sub Group

From the group menu:
1. Click Add Sub Group to open the Create Sub Group
dialog box:
Fig. 3:1-24 Create Sub Group box
2. Enter the Group Name for the sub-group.
NOTES: The name of the sub-group must be less than 20 char-
acters; cannot be "IP", "NT", or LDAP", and cannot contain
spaces. The first character cannot be a digit.
The following characters cannot be used in the name: "." (period),
"," (comma), ":" (colon), ";" (semi-colon), "!" (exclamation point),
"?" (question mark), "&" (ampersand), "*" (asterisk), """ (quotation
mark), "'" (apostrophe), "`" (grave accent mark), "~" (tilde), "^"
(caret), "_" (underscore), "|" (pipe), "/" (slash), "\", (backslash)",
"\\" (double backslashes), "(" (left parenthesis), ")" (right paren-
thesis), "{" (left brace), "}" (right brace), "[" (left bracket), "]" (right
bracket), "@" (at sign), "#" (pound sign), "$" (dollar sign), "%"
(percent sign), "<" (less than symbol), ">" (greater than symbol),
"+" (plus symbol), "-" (minus sign), "=" (equals sign).
3. Click OK to close the dialog box and to add the sub-
group to the master IP group tree.
ROUP SCREEN
8 6 T
E ECHNOLOGIES
, P B U G
ROXY LOCKER SER UIDE