Installation - Havso Frida 3.5 User Manual

– Remove all packing material and accessories. Examine the oven for any
damage such as dents or broken door. Do not install if oven is damaged.
– Cabinet: Remove any protective film found on the microwave oven cabinet
surface. Do not remove the light brown Mica cover that is attached to the oven
cavity to protect the magnetron.

Installation

1. Select a level surface that provide
enough open space for the intake
and/or outlet vents.
2. The minimum installation height is
85 cm.
3. The rear surface of appliance shall
be placed against a wall. Leave a
minimum clearance of 30 cm above
the oven, a minimum clearance of
20 cm is required between the oven
and any adjacent walls.
4. Do not remove the legs from the
bottom of the oven.
5. Blocking the intake and/or outlet
openings can damage the oven.
6. Place the oven as far away
from radios and TV as possible. Operation of microwave oven may cause
interference to your radio or TV reception.
7. Plug your oven into a standard household outlet. Be sure the voltage and the
frequency is the same as the voltage and the frequency on the rating label.
WARNING: Do not install oven over a range cooktop or other heat-producing
appliance. If installed near or over a heat source, the oven could be damaged and
the warranty would be void.
THE ACCESSIBLE
SURFACE MAY
BE HOT DURING
OPERATION.
INSTALLATION
23