Advertisement
MAINTENANCE
CLEA NING AND STORAGE
ATTENTION: Please shut off the unit and unplug from the mains before cleaning or
performing any maintenance.
Cleaning the surface
Clean the grills with a duster or a soft wet cloth.
Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause
irreversible damage. Make sure no water enters the control panel or fan motor
Do not run the unit until completely dry.
Place the fan in its original box or cover the fan to protect it from dust.
Store it in a cool dry place.
TROUBLESHOOTING
Do not repair or disassemble the unit by yourself, unauthorized repair attempts will invalidate
the warranty and may cause bodily harm.
Issue
No power
Odour
emission
from unit
Strong
vibrations
and noise
If the above solutions do not resolve the problem please contact the service centre.
Possible Reason
1. Power cord is unconnected
2. The There is no power from socket
3. The power switch is not on.
4. The fuse has blown
1. New unit. When the unit is used for
the first time the fan motor may
produce
and
odour
dissipate within a week of use
1. Fan is not used on a flat surface
2. Fan may be damaged
Page 6 of 8
Solution
1. Connect the power cord
2. Check socket is turned on
3. Turn the unit on
4. Replace the fuse in the plug
1. No action required
which
will
1. Place on a flat surface. May put an
anti-vibration matt underneath
2. if fan is damaged discontinue use
and contact service centre
Advertisement
