Advertisement
Connection
WARNING
WARNING
Particular attention must be given to making good
electrical contact at the amplifier-output and speaker
terminals.
Poor or loose connections can cause sparking or
burning at the terminals because of the very high
power that the amplifier can deliver.
CAUTION
• If sound is not output normally, immediately turn power
off and check connections.
• Be sure to turn the power off before changing the setting
of any switch.
• If the fuse blows, check wires for shorts, then replace the
fuse with one of the same rating.
• Check that no unconnected wires or connectors are
touching the car body. Do not remove caps from
unconnected wires or connectors to prevent short
circuits.
• Connect the speaker wires to appropriate speaker
connectors separately. Sharing the negative wire of the
speaker or grounding speaker wires to the metal body of
the car can cause this unit to fail.
• After installation, check that the brake lamps, turn signal
lamps and windshield wipers work properly.
WARNING
To prevent fire caused by a short in the wiring,
connect a fusible link or breaker nearby the
battery's positive terminal.
Remove the ignition key and disconnect the negative · terminal of the
battery to prevent short circuits.
7 Power wire and speaker wire connection
Power control wire
Battery wire
Protective fuse
Battery
Ground wire
Center unit (CD receiver, etc.)
2-channel + Subwoofer system
Lead terminal
Stereo
Left
A.ch
A.ch
Right
Left
B.ch
B.ch
Right
Left
Right
Subwoofer
Advertisement
