Advertisement
Description
The Dan W3 is a flashing lifejacket light which is activated by a water sensor or
manually using the test-on/off button.
Daniamant ApS
Industrivej 24C
DK-3550, Slangerup, Denmark
Tel: +45 47 37 38 00 Fax: +45 47 37 38 09
Email: orders@daniamant.com
www.daniamant.com
W3-Instruction Issue 07 (D0500,)
www.daniamant.com
Installation and Maintenance Instructions
Dan W3 lifejacket light
Advertisement
Table of Contents
Summary of Contents for Daniamant Dan W3
- Page 1 Dan W3 lifejacket light Installation and Maintenance Instructions Description The Dan W3 is a flashing lifejacket light which is activated by a water sensor or manually using the test-on/off button. Daniamant ApS Industrivej 24C DK-3550, Slangerup, Denmark Tel: +45 47 37 38 00 Fax: +45 47 37 38 09 Email: orders@daniamant.com...
- Page 2 The Dan W3 is for use on all types of lifejackets. The Dan W3 is supplied with a fixing clip. The clip is intended to be placed behind a strip of lifejacket material or reflective tape; the light is secured by pressing it into the clip.
- Page 3 It is recommended that the light is activated for 1 minute. then press the manual test button to deactivate the light. Replacement The Dan W3 lifejacket lights have a storage life of 5 years and must be replaced by the date shown on the label. Health and safety information Dan W3 lights contain Lithium cells.
- Page 4 To ensure compliance with the WEEE and Battery Regulations, the Survivor Location Lights placed on the market in the UK or Denmark should be returned to Daniamant in the UK or Denmark, or deposited in your nearest WEEE Designated Collection Facility, operated by your Local Authority.
Need help?
Do you have a question about the Dan W3 and is the answer not in the manual?
Questions and answers