SPORTSPOWER MSC-3788-5S-BM Owner's Manual
  1. Manuals
  2. Brands
  3. SPORTSPOWER Manuals
  4. Swing sets
  5. MSC-3788-5S-BM
  6. Owner's manual

SPORTSPOWER MSC-3788-5S-BM Owner's Manual

6 station swing set
Hide thumbs
Table of Contents

Advertisement

Quick Links

6 STATION SWING SET
MODEL # MSC-3788-5S-BM
OWNER'S MANUAL
ASSEMBLY INSTRUCTION, CARE, MAINTENANCE AND USER'S GUIDE
FOR RESIDENTIALUSEONLY
WARNING
This product is designed to be used simultaneously by up to 6 children between the ages 3 to 8.
Maximum weight of each user is 100lbs(45kg). Combined weight of all users must not exceed
600lbs(272kg).
Carefully read this entire instruction manual before you start to assemble or use this swing set.
You must follow all instructions and warnings while using this equipment.
Constant adult supervision is required during use.
Do not use this swing set on hard packed soil, concrete, or any kind of hard surface.
This equipment must be anchored (anchors not included). You should consult your local
contractor regarding the best way to anchor the product in your location of installation.
Assembly requires at least two adults.
Save this instruction manual for future reference
For Customer Service, please call 1-866-370-2131 or visit
www.sportspowerltd.net
Monday – Friday 9:00 AM – 5:00 PM Eastern Time
Sportspower Ltd.
Level 20, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong
Corporate Office 1-800-497-6106

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MSC-3788-5S-BM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SPORTSPOWER MSC-3788-5S-BM

  • Page 1 6 STATION SWING SET MODEL # MSC-3788-5S-BM OWNER’S MANUAL ASSEMBLY INSTRUCTION, CARE, MAINTENANCE AND USER’S GUIDE FOR RESIDENTIALUSEONLY WARNING This product is designed to be used simultaneously by up to 6 children between the ages 3 to 8. Maximum weight of each user is 100lbs(45kg). Combined weight of all users must not exceed 600lbs(272kg).
  • Page 2 INTRODUCTION Dear Valued Customer, Congratulations on your Sportspower play set purchase! Please read and completely understand the contents of this owner’s manual. This manual contains specific instructions and warnings that must be followed to prevent injuries. This play set is for residential use only. This play set is NOT intended for public or commercial use.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS IMPORTANT INSTRUCTIONS AND WARNINGS ........................ 4 IMPORTANT CONSUMER INFORMATION SHEET ......................8 ANCHORING.................................... 9 CARE AND MAINTENANCE CHECKLIST ......................... 11 TOOLS NEEDED ................................... 12 PARTS LIST ................................... 13 ASSEMBLY AND INSTALLATION INSTRUCTIONS ......................18 AREA OF INSTALLATION - SWING SET TOP BAR ......................18 AREA OF INSTALLATION - UPPER SIDE LEGS ........................

  • Page 4: Important Instructions And Warnings

    IMPORTANT INSTRUCTIONS AND WARNINGS WARNING READ ALL INSTRUCTIONS BEFORE ASSEMBLING OR USING THIS EQUIPMENT AGE LIMIT This product is designed to be used by up to six(6) children between the ages of 3 to 8. Maximum user weight is 100 pounds (45kg). Combined maximum weight is 600 pounds (272kg). The play set is designed for children over three (3) years old.
  • Page 5 Some consumers want an anchoring system that allows the product to be moved to different locations. Other consumers want to keep their swing set in a permanent location. There are different types and different methods of anchoring this product. Sportspower does not make a specific anchoring recommendation as each consumer’s need and conditions can vary.
  • Page 6 PLAY SUPERVISION Observing the following statements and warnings reduces the likelihood of serious or fatal injury. DO NOT allow more than one child to play on the individual swing, trapeze or slide component at the same time. The maximum user limit for the glide ride is two persons. DO NOT allow children to stand on any of the seats or rides.
  • Page 7 INSPECTION PRIOR TO EACH USE OR DAILY INSPECTION DO NOT use the equipment if any bolts or nuts are missing or loose. ALWAYS check to ensure the equipment and all parts are well secured and stable before each use. ALWAYS clear the play area of any rocks, sharp objects, or any materials that could be potentially hazardous to users.

  • Page 8: Important Consumer Information Sheet

    IMPORTANT CONSUMER INFORMATION SHEET The Consumer Product Safety Commission estimates there are more than 200,000 playground related injuries involving children each year. Injuries involving this hazard pattern tend to be among the most serious of all playground injuries and have the potential to be fatal, particularly when the injury is to the head. The surface under and around playground equipment can be a major factor in determining the injury-causing potential of a fall.

  • Page 9: Anchoring

    ANCHORING (NOTE: ANCHORS NOT INCLUDED - MUST BE PURCHASED SEPARATELY) There are different ways of anchoring the equipment, depending on the type of ground on which the equipment is to be installed. Make sure that all anchors are below ground level to prevent tripping. You should consult your local licensed contractor to decide the most appropriate way to anchor the equipment in your location.
  • Page 10 FRAME LEG 12-5/8” CONCERETE 5” 2” BRICK OR GRAVEL BED Note: The maximum fall height for this product is 6 feet. The minimum ground clearance between the bottom of the suspended plays and the playing or ground surface must be 8 inches. You must maintain a minimum of 8 inches of ground clearance.

  • Page 11: Care And Maintenance Checklist

    CARE AND MAINTENANCE CHECKLIST AT THE BEGINNING OF EACH PLAY SEASON: Tighten all hardware. Lubricate all metallic moving parts per manufacturer’s instructions. Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing. Check all moving parts including swing seats, ropes, cables and chains for wear, rust or other deterioration.

  • Page 12: Tools Needed

    All rusted parts, bolts must be properly disposed of in trash bin. Do not reuse. TOOLS NEEDED Please prepare the following tools prior to assembling this equipment. Special Socket Wrench (Included) Tape Measure (Not included) Wrench (Included) Wrench (included) Hammer (May be needed for installing anchor) (Not included) Small Allen wrench (Included)

  • Page 13: Parts List

    PARTS LIST Parts List for Main Frame Part No. Picture Description Quantity TOP BAR - SHORT TOP BAR - MIDDLE TOP BAR - LONG END CAP (PRE-ASSEMBLED) UPPER LEG LOWER LEG CROSS BAR CROSS BAR– WITH TWO HOLES FOR CONNECTING SLIDE Hardware used for Main Frame Part No.
  • Page 14 PLASTIC CAP (CURVED FOR ARC WASHER) Parts List for Swing Seat Part No. Picture Description Quantity SWING CHAIN EYE-BOLT (PRE-ASSEMBLED TO SWING CHAIN) SWING SEAT Hardware used for Swing Seat Part No. Picture Description Quantity NYLON NUT 5/16" (8mm) LARGE WASHER PLASTIC CAP (CURVED FOR ARC WASHER) PLASTIC CAP...
  • Page 15 Hardware used for Glide Ride BOLT 5/16" x 1" (8mm x 25mm) NYLON NUT 5/16" (8mm) BOLT 1/4" x 1.46" (6mm x 37mm) BOLT 1/4"x 1.7" (6mm x 43mm) SCREW 1/4" x 0.73" (5.4mm x 18.5mm) J-BOLT SPRING WASHER (MEDIUM) NUT 1/4"...
  • Page 16 Hardware used for Slide Part No. Picture Description Quantity PLASTIC CONNECTOR BOLT 1/4"x38mm BOLT 1/4"x115mm SPRING WASHER(LARGE) CAP NUT 1/4" CAP BOLT 1/4"x14mm SPRING WASHER (MEDIUM) BOLT 1/4"x75mm BOLT 1/4"x35mm BOLT 1/4"x60mm...
  • Page 17 ASSEMBLY INSTRUCTIONS Place the playground equipment on level ground and not less than 6ft(1.8m) from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry line, or electrical wires. Do not install the playground equipment over concrete, asphalt, packed earth, or any other hard surface;...

  • Page 18: Assembly And Installation Instructions

    ASSEMBLY AND INSTALLATION INSTRUCTIONS AREA OF INSTALLATION- SWING SET TOP BAR Step 1– Assemble the top bar frame of the swing set Connect Top Bars A1, A2 and A3 together and secure with B1, B5, B4 and B3 as shown in the enlarged diagram.

  • Page 19: Area Of Installation- Upper Side Legs

    AREA OF INSTALLATION- UPPER SIDE LEGS Step 2– Assemble the support legs of swing set Insert A4 into the sockets on A1. Align holes and secure with B1, B5, B4 and B3 as shown in the enlarged diagram. Repeat in the same manner for A3A.

  • Page 20: Area Of Installation- Lower Side Legs

    AREA OF INSTALLATION- LOWER SIDE LEGS Step 3– Assemble the support legs of swing set Connect A5 to A4. Align holes and secure with B1, B5, B4 and B3 as shown.

  • Page 21: Area Of Installation- Cross Bars

    AREA OF INSTALLATION- CROSS BARS Step 4– Attach the crossbar to the support legs Attach A6 to A5 on the right side of the swing set. Secure using B1, B6, B4 and B3 as shown. Attach A7 to A5 on the left side of the swing set. Secure using B1, B6, B4 and B3. IMPORTANT NOTE: The extra 2 holes on A7 will be used for connecting the slide in later steps.

  • Page 22: Area Of Installation - Swing Seat

    AREA OF INSTALLATION– SWINGS Step 5–Swing Seat Assembly Connect the swing chains (J1) to the Swing Seat (J3) with J5, J7 and J4. Attach the swing to the top bar (A1) with J6 and J4. Repeat in the same manner for the other swing by attaching it to A3. Make sure all the bolts are securely fastened.

  • Page 23: Area Of Installation - Trapeze

    AREA OF INSTALLATION - TRAPEZE Step 6- Trapeze Assembly Attach P1 to A2 and secure with P5 and P4 as shown below. Make sure the bolts are securely fastened.

  • Page 24: Area Of Installation - Glide Ride

    AREA OF INSTALLATION - GLIDE RIDE Step 7- Glide Ride Assembly Secure brackets L4 and L3 to A3 using N3, L5 and N10 as shown. Use the special socket wrench provided to fully tighten the bolts and nuts.
  • Page 25 Step 8- Glide Ride Assembly(continued) Attach M5 to L1-N with N4 and N12 as shown in Diagram A, and then connect it to L3 using N2 and N7 as shown in Diagram B. Repeat in the same manner on both sides and make sure all bolts are securely fastened.
  • Page 26 Step 9- Glide Ride Assembly (continued) Attach L2-N to the two sides of L1-N using N5, M3, N11 and N8 as shown in Diagram A. Place M4 on top of L2-N and secure with N1, N6 and N9 as shown in Diagram B. L1-N L1-N L2-N...

  • Page 27: Area Of Installation - Slide

    AREA OF INSTALLATION - SLIDE Step 10 - Slide assembly Insert Slide Front Support (X5-N) into Slide (Y2) and secure with Z9, Z6 and Z4 as shown in below.
  • Page 28 Step 11 –Slide assembly (continued) Insert Slide Leg Tube (X3-N) into X1-N and X2-N as shown. Align the holes and hold in position. Connectthe Slide Top Support Bar(X4-N) onto the Slide Supports (X1-N and X2-N)and secure using Z1, Z6, Z3 and Z5as shown in DIAGRAM11-1. DIAGRAM 11-1 Bolt holes face up...
  • Page 29 Slide assembly (continued) Connect Slide Ladder Steps (X6) to Slide Supports (X1-N and X2-N) .Secure using Z8, Z6 and Z4 as shown in DIAGRAM 11-2. DIAGRAM 11-2...
  • Page 30 Step 12 –Slide assembly (continued) Push the slide (Y2) down and combine with the Slide Top Support Bar (X4-N). Secure Slide (Y2) to both sides to the leg tubes using Z2, Z6, Z6 and Z4 as shown in below. Note: Make sure the Slide (Y2) is securely attached in place.
  • Page 31 Step 13 –Connect the slide to the swing set Connect the assembled slide to the swing set frame. Place Plastic Connector (Y1) between A7 and X1-N and secure together using Z7, Z6,Z3 and Z5 as shown below.
  • Page 32 Do not allow access by children if any parts are missing or damaged. Call our customer service for assistance if any replacement parts are needed. Only official Sportspower genuine parts should be used. Use of non-authorized parts shall void the warranty on the product.

  • Page 33: Manufacturer's Limited Warranty

    Proof of purchase required. For Customer Service, please call 1-866-370-2131 Monday – Friday 9:00 AM – 5:00 PM Eastern Time or visit www.sportspowerltd.net Sportspower Ltd. Level 20, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong Corporate Office: 1-800-497-6106 SP-6-MSC3788-5S-BM-ME-17002...

Table of Contents