Advertisement
Installing the light :
8
Connecting the light to
the transformer :
C
B
A
10
Caution : The Underwater Light UL 35 must only be operated
under water.
The light can be installed in 4 different ways:
4
5
Foot
1. Installing the light in the desired way.
– Foot : slide the light
bolted to a solid surface.
– Spike : slide the light
into the ground.
– Nozzle Tube Bracket : screw on the adjuster
7
off the mounting
9
bracket
and tighten the adjuster
tube bracket
– Wall Tube Bracket : screw on the adjuster
8
mounting
position. Insert the light
the adjuster
2. Adjusting the horizontal beam angle :
Turn the light to the desired horizontal beam angle.
3. Adjusting the vertical beam angle :
Slacken the adjuster
light to the desired angle and re-tighten the adjuster
We recommend that connection is made only at temperatures
> 0 °C. This will ensure that the cable has the necessary degree
of elasticity.
1. Place the transformer in a dry place not subject to flooding.
(The transformer can be bolted to a solid surface using the
∅
A
holes
(
4 mm).
2. Plug the light connecting cable into the socket
transformer and tighten the locking nut
3. Switching the light on : Insert the transformer mains plug into
a 230 V mains socket.
The light will switch on.
V To switch the light off : unplug the transformer from the mains.
4
0
6
Spike
Nozzle Tube
Bracket
4
on to the foot
4
on to the spike
8
. Insert the light
9
to the nozzle tube with a rubber tie
8
. Screw the mounting
4
into the mounting
7
.
7
by screwing it anti-clockwise, turn the
7
7
9
8
Wall Bracket
5
. The foot can be
6
. Push the spike
7
and pull
4
into the nozzle tube
7
. Secure the nozzle
0
.
7
and pull off the
to the wall in the desired
8
and tighten
7
.
B
on the
C
on to the connection.
4
Advertisement
