Configuration And Setup; Unpacking; Routing The Cables - Black Box UCCSS-10-30H-S User Manual

CHAPTER 3: CONFIGURATION AND SETUP

3.1 UNPACKING

Remove and discard all packaging materials and lock the lockable casters.
Open and inspect the cart to verify all doors, locks, and casters are working properly.
Do not plug the cart into a wall outlet until all configurations and setup are complete.

3.2 ROUTING THE CABLES

1. At the back of the cart, loosen the two screws on the cable manager, slide the top section of the cable manager, and place the device
side of the charging cable into one of the slots. See Figure 3-1.
2. Slide back the top section of the cable manager and tighten the screws.
3. Route the device side of the charging cable to the front of the cart.
FIGURE 3-1. CABLE ROUTING DIAGRAM #1
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
7