Summary of Contents for EBS CPX200NW
- Page 1 ALARM CONTROL UNIT CPX200NW User manual Version of the manual: v1.5 Date of issue: 2015.04.08 Firmware version: 1.1.1 GPRS transmitter configurator version: 1.3.45.23...
- Page 2 DECLARATION OF COMPLIANCE We, EBS Sp. z o.o., declare with full responsibility that the present product meets all requirements provided for in the Directive 1999/5/EC of European Parliament and Council dated 9 March 1999 The copy of the “Declaration of Compliance” can be found at http://www.ebs.pl/en/certificates/...
-
Page 3: Table Of Contents
8.4. ADDING A NEW USER ....................17 8.5. USER DELETE ......................18 8.6. CHANGE OF USER CODE....................19 8.7. PROGRAMMING TIME ....................19 8.8. PROGRAMMING DATE ....................19 8.9. TEXT MESSAGES ......................20 CHANGE HISTORY...................... 28 CPX200NW ALARM CONTROL UNIT – USER MANUAL 3 / 28... -
Page 4: Introduction
1. INTRODUCTION Thank you for choosing EBS alarm control unit. CPX200N is a simple, functional alarm control unit integrated with GSM/GPRS/SMS transmitter, intended for small- and medium- sized facilities. The central unit is equipped with 3 outputs and 7 wired and 9 wireless zones with the possibility to be divided into 2 partitions. -
Page 5: Control Unit Functions
• 1 service code • 8 user codes • Possibility to restrict the scope of authorisation to a few codes only SYSTEM OPTIONS • Automatic diagnosis of basic system components CPX200NW ALARM CONTROL UNIT – USER MANUAL 5 / 28... -
Page 6: Electrical Characteristic
Lead-acid 12V Low voltage – event treshold: Voltage battery cut off level: below 9V Working temperature: -10ºC to +55ºC Working humidity: 5% to 93% PCB dimensions: 152mm x 78mm x 30mm CPX200NW ALARM CONTROL UNIT – USER MANUAL 6 / 28... -
Page 7: Keypad Specification
99 x 82 x 19 mm Keypad type: LED, 16 status LEDs, 4 mode LEDs (ALARM, ARMED, SYSTEM, PROG) Button layout: Standard telephone keypad 3 x 4 buttons Drawing 1. KP16 Keypad CPX200NW ALARM CONTROL UNIT – USER MANUAL 7 / 28... - Page 8 Connectors for connecting cables joining the keypad with the alarm control unit. 8. Cable Entry It is a place for entering the connection cables. 9. Assembly Holes The keypad was equipped with four round assembly holes for proper fastening the keypad. CPX200NW ALARM CONTROL UNIT – USER MANUAL 8 / 28...
- Page 9 After the keypad is assembled the switch contact is closed. Unauthorised disassembly of the keypad will send the message to the alarm control unit. In order to eliminate surface unevenness, a spring is located on the switch lever. CPX200NW ALARM CONTROL UNIT – USER MANUAL 9 / 28...
-
Page 10: Remote Control Specification
REMOTE CONTROL SPECIFICATION Frequency: 433.92MHz Coding: Keeloq code hopping Number of buttons: 4 Battery: Varta Li-Mn 3V type CR2032 - ARM button - DISARM button - SILENT ALARM button - ALARM button CPX200NW ALARM CONTROL UNIT – USER MANUAL 10 / 28... -
Page 11: Arming The System
If there is no possibility to quickly remove faults, press to arm the system. Pressing will cancel the arming process. Note: Remove the causes of faults as soon as possible. Error codes: 1 – Damage or disruption of detector CPX200NW ALARM CONTROL UNIT – USER MANUAL 11 / 28... - Page 12 2 – Damage of signalling device or signalling device active 3 – Damage of internal connection or sabotage 4 – AC power supply damage 5 – Battery damage 6 – ATS damage 8 – Other damages CPX200NW ALARM CONTROL UNIT – USER MANUAL 12 / 28...
-
Page 13: Disarming The System
. 3 beeps will confirm the code. Also, the system will be disarmed. 2. In order to identify the alarm type, please refer to ALARMS MEMORY chapter of the present manual. CPX200NW ALARM CONTROL UNIT – USER MANUAL 13 / 28... -
Page 14: Partition Handling
Leave the facility before the time for leaving expires. After it is armed the ARMED LED will be constantly on. 3. If partition disarming is selected, the relevant partition will be immediately disarmed. CPX200NW ALARM CONTROL UNIT – USER MANUAL 14 / 28... -
Page 15: User Functions
2 – Keypad tamper 2 3 – Keypad tamper 3 Other alarm source types -> Remote control alarm: 5 – KEELOQ remote control alarm Note: Alarms memory is cleared after the system is armed. CPX200NW ALARM CONTROL UNIT – USER MANUAL 15 / 28... -
Page 16: Faults Memory
To return to the main fault menu, press AC fault 4 – No more detailed information. Battery fault 5 – No more detailed information. ATS fault 6 – No more detailed information. CPX200NW ALARM CONTROL UNIT – USER MANUAL 16 / 28... -
Page 17: Zone Blocking
8.4. ADDING A NEW USER You can add a new user code here. New codes can be added by the administrator only. 3 beeps will confirm the successfully entered function. Default admin code: 1111. CPX200NW ALARM CONTROL UNIT – USER MANUAL 17 / 28... -
Page 18: User Delete
4. Enter the ID code (1- 8) of a user to be deleted and press to confirm or to exit without saving changes. 5. Successful deletion of a user will be confirmed with 3 beeps, otherwise a constant sound will be emitted. CPX200NW ALARM CONTROL UNIT – USER MANUAL 18 / 28... -
Page 19: Change Of User Code
< Administrator code > <YY> <MM> DD> where: Administrator code – Administrator Code. – Year. – Month. – Day. In any moment you can press to exit without saving changes. CPX200NW ALARM CONTROL UNIT – USER MANUAL 19 / 28... -
Page 20: Text Messages
For SMS to be accepted, the phone number from which the text is being send, has to be enlisted on the allowed numbers list. CPX200NW can store up to 10 phone numbers and up to 32 text messages. If, for any reason, the SMS can not be... - Page 21 NR – number of the partition, possibile values: 1 or 2 Example: 1234 GETNAME=PARTITION,1 Feedback message GETNAME=PARTITION,NR,VALUE GETNAME:ERROR Feedback message GETNAME=PARTITION,NR,VALUE – partition name description GETNAME:ERROR – command rejected by the system CPX200NW ALARM CONTROL UNIT – USER MANUAL 21 / 28...
- Page 22 ID – index of phone number on the list, possible values: 1 to 10 Example: 1234 GETTELNUM=2 Feedback message GETTELNUM=ID,NUMBER GETTELNUM:ERROR Feedback message GETTELNUM=ID,NUMBER – information about phone description number GETTELNUM:ERROR – command rejected by the system CPX200NW ALARM CONTROL UNIT – USER MANUAL 22 / 28...
- Page 23 ID – index of text, possible values: 1 to 32 Example: 1234 GETMESSAGE=30 Feedback message GETMESSAGE=ID,MESSAGE GETMESSAGE:ERROR Feedback message GETMESSAGE=ID,MESSAGE – information about the description contents of text message GETMESSAGE:ERROR – command rejected by the system CPX200NW ALARM CONTROL UNIT – USER MANUAL 23 / 28...
- Page 24 6 will be sent to phone numbers with indexes 1,8 and 9. Feedback message SETUSERSMS=EVENT,TELNUM,MSG_ID:OK SETUSERSMS=EVENT,TELNUM,MSG_ID:ERROR Feedback message SETUSERSMS=EVENT,TELNUM,MSG_ID:OK – description command accepted SETUSERSMS=EVENT,TELNUM,MSG_ID:ERROR – command rejected by the system CPX200NW ALARM CONTROL UNIT – USER MANUAL 24 / 28...
- Page 25 DISARM1 Partition 1 disarmed DISARM2 Partition 2 disarmed INPUT1 Violation of zones 1…16 (to INPUT16) INPUT1-OFF Violation of zones 1…16 ended (to INPUT16-OFF) INPUT1-TAMPER Sabotage of zones 1…16 (to INPUT16-TAMPER) CPX200NW ALARM CONTROL UNIT – USER MANUAL 25 / 28...
- Page 26 KEYPAD1-OK Failure of keypad 1...3 ended (to KEYPAD3-OK) KEYPAD1-TAMPER Sabotage of keypad 1…3 (to KEYPAD3-TAMPER) KEYPAD1-TAMPEREND Sabotage of keypad 1…3 ended (to KEYPAD3-TAMPEREND) JAMMING-BEGIN GSM jamming JAMMING-END GSM jamming ended CPX200NW ALARM CONTROL UNIT – USER MANUAL 26 / 28...
- Page 27 List of errors sent as feedback messages Alias name Description ERROR-PERMISSION Permission to issue this command was not granted ERROR-FORMAT Wrong command syntax ERROR-VALUE Wrong parameter value ERROR-EMPTY Parameter value missing ERROR Other error CPX200NW ALARM CONTROL UNIT – USER MANUAL 27 / 28...
-
Page 28: Change History
Added “24h fire” zone. Added new events handled 12.08.2014 / i1.3 / 1.0rc16 by the SETUSERSMS and GETUSERSMS commands. 23.10.2014 / i1.4 / 1.0rc17 Small changes. 08.04.2015 / i1.5 / 1.1.1 Added electrical characteristic table. CPX200NW ALARM CONTROL UNIT – USER MANUAL 28 / 28...
Need help?
Do you have a question about the CPX200NW and is the answer not in the manual?
Questions and answers