3MillID S-Gang Keypad Reader Manual

3MillID S-Gang Keypad Reader Manual

Access control reader

Advertisement

style or technology - now you can have both
Product Features
Designed to embrace cutting-edge RFID
technologies in a stylish and innovative
package, this advanced access control reader
offers a refreshing breakthrough in the access
security marketplace. Shaped in a sleek single-
gang style design, with an RGB LED illuminated
keypad, offering 'prox-and-pin' security, the reader
may be fixed directly onto a US electrical backbox.
This powerfully secure and innovative reader has a beautifully
clean aesthetic, and a bright RGB LED that can be applied to many
applications such as colour coded access levels, migration status or mood lighting.
The reader housing is moulded using tough polycarbonate plastic, and includes a shadow-line
backplate, a subtle and simple mechanical design feature that makes the reader, when fixed,
appear to float against the wall.
Images shown in this document are for illustrative purposes only. The features, colours, style and appearance may change without notice.
© 3millID
100-02640-A
S-Gang
Keypad
125KHz
13.56MHz
Bluetooth LE
Black textured moulding
Slim profile
RGB LED
Fully encapsulated electronics
RGB illuminated keypad
Wide range of output formats
5 year limited warranty
Read range up to 10cm (4 inches)
3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129
www.3millid.com
+1 303 475 4972
3M
MANUAL
Proximity
Smart Contactless
sales@3millid.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S-Gang Keypad Reader and is the answer not in the manual?

Questions and answers

Summary of Contents for 3MillID S-Gang Keypad Reader

  • Page 1: Operation Is Subject To The Following Two Conditions

    Read range up to 10cm (4 inches) Images shown in this document are for illustrative purposes only. The features, colours, style and appearance may change without notice. © 3millID 3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129 sales@3millid.com www.3millid.com...
  • Page 2: Table Of Contents

    EU Directive 2012/19/EC © 3millID 3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129 sales@3millid.com www.3millid.com +1 303 475 4972 100-02640-A...
  • Page 3: Parts List

    Red LED control input Buzzer Buzzer control input TMPR/CP Tamper or Card Present output RS485- RS485 Bus 10 - RS485+ RS485 Bus © 3millID 3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129 sales@3millid.com www.3millid.com +1 303 475 4972 100-02640-A...
  • Page 4: Installation Guide

    Following installation, it is recommended the access control system and control units are subjected to a maintenance and operational test procedure. TEST COMPLETE SYSTEM AT LEAST ONCE A YEAR © 3millID 3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129 sales@3millid.com www.3millid.com +1 303 475 4972...
  • Page 5: Keypad Programming Guide

    - set engineer’s PIN code LOG OFF - exit configuration mode ‘MIFARE’, ‘MIFARE Classic’ and ‘MIFARE DESFire EV1’ are trademarks of NXP B.V. © 3millID 3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129 sales@3millid.com www.3millid.com +1 303 475 4972 100-02640-A...
  • Page 6: Log-On Entering 'Programming Mode

    26-bit WIEGAND format, you should example enter: *017# once the reader has been placed into programming mode. © 3millID 3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129 sales@3millid.com www.3millid.com +1 303 475 4972 100-02640-A...
  • Page 7: Key Tone - Set Audible Tone On Key Press

    To DISABLE transmission of the card data, enter: *040# example once the reader has been placed into programming mode. © 3millID 3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129 sales@3millid.com www.3millid.com +1 303 475 4972 100-02640-A...
  • Page 8: Rx00 Led - Set Led Colour Configuration

    OFF (LED disabled when in idle mode) To set the LED to TURQUOISE enter: *076# once the example reader has been placed into programming mode. © 3millID 3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129 sales@3millid.com www.3millid.com +1 303 475 4972 100-02640-A...
  • Page 9: Rx00 Hid - Set Reader To Read Hid

    Extended 4002 40-bit WIEGAND To set 4001 40-bit WIEGAND enter: *121# once the example reader has been placed into programming mode. © 3millID 3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129 sales@3millid.com www.3millid.com +1 303 475 4972 100-02640-A...
  • Page 10: Rx00 Awid - Set Reader To Read Awid

    *151# ..ENABLE function To enable Farpointe enter: *151# once the reader has example been placed into programming mode. © 3millID 3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129 sales@3millid.com www.3millid.com +1 303 475 4972 100-02640-A...
  • Page 11: Rx80 Mifare - Set Reader To Read Mifare

    *301# ..ENABLE function To ENABLE function, enter: *301# once the reader has example been placed into programming mode. © 3millID 3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129 sales@3millid.com www.3millid.com +1 303 475 4972 100-02640-A...
  • Page 12: Set Pin Set Engineer's Pin Code

    30 seconds if no keys are pressed for that duration. Any changes you may have made to values or settings will be lost. keypad programming guide © 3millID 3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129 sales@3millid.com www.3millid.com +1 303 475 4972 100-02640-A...

Table of Contents

Save PDF