Channellabelsetup; Inputsource; Inputlabel - LG 50PX1D Owner's Manual

Owner's
Manual 25
Operation
-
Change
the
picture
source so
you
can
watch your TV, cable TV, VCR, DVD,
or
any other devices that
are
connected to your TV.
1. Press the MENU button and then
use /
button
to
select the SETUP
menu.
2. Press the button and then
use
/
button
to
select
Input
Source.
3. Press the button and then
use
/
button
to
select the
source:
Antenna,
Cable, Video, Front Video,
Component1, Component2,
RGB-DTV
(or RGB-PC),
HDMI/DVI.
4. Press EXIT button to return to TV viewing
or
press MENU button to return to the
previous
menu.
Note:
?
To
toggle
RGB-DTV and RGB-PC, select RGB-DTV(or RGB-PC) and press
button.
Input
Source Input
Source
1. Press the MENU button and then
use /
button to select the SETUP
menu.
2. Press the button and then
use
/
button
to
select
Input
Label.
3. Press the button and then
use /
button
to
select the
source:
Video,
Front
Video, Component1, Component2, RGB,
HDMI/DVI.
4. Press the
/
button
to
select the label.
5. Press EXIT button to return to TV
viewing
or
press MENU button to return to the
previous
menu.
Input
Label Input
Label
-
Choose
preset
labels for your channels.
-
If
a
channel label is provided
on
the signal from the broadcasting station, the TV displays
a
short
name
for
a
channel
-
even
if you didn't
preset
a
label for the channel.
1. Press the MENU button and then
use /
button
to
select the SETUP
menu.
2. Press the button and then
use
/
button
to
select Channel Label.
3. Press the button. You will
now see a screen
filled with Labels and
a
preview
screen.
4. Use the CH / button
to
select
a
channel
to
Label.
5. Use
/
/ /
button
to
select the
appropriate
label for the
channel,
then press ENTER button
to set
the Label
to
the selected channel.
-
If you press ENTER button in TV
viewing
mode, you will
see
the channel banner.
?
For
example:
Channel Label
Setup
Channel Label Setup
-
Sets
a
label to each input
source or
lets you skip the input
source
which is not
in
use
when you press TV/VIDEO button.